Radial velocity maps¶

class starry.Map

The radial velocity starry map class.

This class handles velocity-weighted intensities for use in Rossiter-McLaughlin effect investigations. It has all the same attributes and methods as starry.maps.YlmBase, with the additions and modifications listed below.

Note

Instantiate this class by calling starry.Map() with ydeg > 0 and rv set to True.

property N

Total number of map coefficients. Read-only

This is equal to \(N_\mathrm{y} + N_\mathrm{u} + N_\mathrm{f}\).

property Nf

Number of spherical harmonic coefficients in the filter. Read-only

This is equal to \((f_\mathrm{deg} + 1)^2\).

property Nu

Number of limb darkening coefficients, including \(u_0\). Read-only

This is equal to \(u_\mathrm{deg} + 1\).

property Ny

Number of spherical harmonic coefficients. Read-only

This is equal to \((y_\mathrm{deg} + 1)^2\).

property amp: The overall amplitude of the map in arbitrary units. This factor multiplies the intensity and the flux and is thus proportional to the luminosity of the object. For multi-wavelength maps, this is a vector corresponding to the amplitude of each wavelength bin.

property angle_unit: An astropy.units unit defining the angle metric for this map.

property deg

Total degree of the map. Read-only

This is equal to \(y_\mathrm{deg} + u_\mathrm{deg} + f_\mathrm{deg}\).

draw()

Draw a map from the posterior distribution.

This method draws a random map from the posterior distribution and sets the y map vector and amp map amplitude accordingly. Users should call solve() to enable this attribute.

property drorder: Differential rotation order. Read-only

property fdeg: Degree of the multiplicative filter. Read-only

intensity(**kwargs)

Compute and return the intensity of the map.

Parameters

lat (scalar or vector, optional) – latitude at which to evaluate the intensity in units of angle_unit.
lon (scalar or vector, optional) – longitude at which to evaluate the intensity in units of angle_unit.
rv (bool, optional) – If True, computes the velocity-weighted intensity instead. Defaults to True.
theta (scalar, optional) – For differentially rotating maps only, the angular phase at which to evaluate the intensity. Default 0.
limbdarken (bool, optional) – Apply limb darkening (only if udeg > 0)? Default True.

limbdark_is_physical()

Check whether the limb darkening profile (if any) is physical.

This method uses Sturm’s theorem to ensure that the limb darkening intensity is positive everywhere and decreases monotonically toward the limb.

Returns: Whether or not the limb darkening profile is physical.
Return type: bool

lnlike(*, design_matrix=None, woodbury=True, **kwargs)

Returns the log marginal likelihood of the data given a design matrix.

This method computes the marginal likelihood (marginalized over the spherical harmonic coefficients) given a light curve and its covariance (set via the set_data() method) and a Gaussian prior on the spherical harmonic coefficients (set via the set_prior() method).

Parameters

design_matrix (matrix, optional) – The flux design matrix, the quantity returned by design_matrix(). Default is None, in which case this is computed based on kwargs.
woodbury (bool, optional) – Solve the linear problem using the Woodbury identity? Default is True. The Woodbury identity is used to speed up matrix operations in the case that the number of data points is much larger than the number of spherical harmonic coefficients. In this limit, it can speed up the code by more than an order of magnitude. Keep in mind that the numerical stability of the Woodbury identity is not great, so if you’re getting strange results try disabling this. It’s also a good idea to disable this in the limit of few data points and large spherical harmonic degree.
kwargs (optional) – Keyword arguments to be passed directly to design_matrix(), if a design matrix is not provided.

Returns

The log marginal likelihood, a scalar.

property nw: Number of wavelength bins. Read-only

remove_prior(): Remove the prior on the map coefficients.

render(**kwargs)

Compute and return the intensity of the map on a grid.

Returns an image of shape (res, res), unless theta is a vector, in which case returns an array of shape (nframes, res, res), where nframes is the number of values of theta. However, if this is a spectral map, nframes is the number of wavelength bins and theta must be a scalar.

Parameters

res (int, optional) – The resolution of the map in pixels on a side. Defaults to 300.
projection (string, optional) – The map projection. Accepted values are ortho, corresponding to an orthographic projection (as seen on the sky), and rect, corresponding to an equirectangular latitude-longitude projection. Defaults to ortho.
theta (scalar or vector, optional) – The map rotation phase in units of angle_unit. If this is a vector, an animation is generated. Defaults to 0.0.
rv (bool, optional) – If True, computes the velocity-weighted intensity instead. Defaults to True.

rv(**kwargs)

Compute the net radial velocity one would measure from the object.

The radial velocity is computed as the ratio

\(\Delta RV = \frac{\int Iv \mathrm{d}A}{\int I \mathrm{d}A}\)

where both integrals are taken over the visible portion of the projected disk. \(I\) is the intensity field (described by the spherical harmonic and limb darkening coefficients) and \(v\) is the radial velocity field (computed based on the equatorial velocity of the star, its orientation, etc.)

Parameters

xo (scalar or vector, optional) – x coordinate of the occultor relative to this body in units of this body’s radius.
yo (scalar or vector, optional) – y coordinate of the occultor relative to this body in units of this body’s radius.
zo (scalar or vector, optional) – z coordinate of the occultor relative to this body in units of this body’s radius.
ro (scalar, optional) – Radius of the occultor in units of this body’s radius.
theta (scalar or vector, optional) – Angular phase of the body in units of angle_unit.

set_data(flux, C=None, cho_C=None)

Set the data vector and covariance matrix.

This method is required by the solve() method, which analytically computes the posterior over surface maps given a dataset and a prior, provided both are described as multivariate Gaussians.

Parameters

flux (vector) – The observed light curve.
C (scalar, vector, or matrix) – The data covariance. This may be a scalar, in which case the noise is assumed to be homoscedastic, a vector, in which case the covariance is assumed to be diagonal, or a matrix specifying the full covariance of the dataset. Default is None. Either C or cho_C must be provided.
cho_C (matrix) – The lower Cholesky factorization of the data covariance matrix. Defaults to None. Either C or cho_C must be provided.

set_prior(*, mu=None, L=None, cho_L=None)

Set the prior mean and covariance of the spherical harmonic coefficients.

This method is required by the solve() method, which analytically computes the posterior over surface maps given a dataset and a prior, provided both are described as multivariate Gaussians.

Note that the prior is placed on the amplitude-weighted coefficients, i.e., the quantity x = map.amp * map.y. Because the first spherical harmonic coefficient is fixed at unity, x[0] is the amplitude of the map. The actual spherical harmonic coefficients are given by x / map.amp.

This convention allows one to linearly fit for an arbitrary map normalization at the same time as the spherical harmonic coefficients, while ensuring the starry requirement that the coefficient of the \(Y_{0,0}\) harmonic is always unity.

Parameters

mu (scalar or vector) – The prior mean on the amplitude-weighted spherical harmonic coefficients. Default is unity for the first term and zero for the remaining terms. If this is a vector, it must have length equal to Ny.
L (scalar, vector, or matrix) – The prior covariance. This may be a scalar, in which case the covariance is assumed to be homoscedastic, a vector, in which case the covariance is assumed to be diagonal, or a matrix specifying the full prior covariance. Default is None. Either L or cho_L must be provided.
cho_L (matrix) – The lower Cholesky factorization of the prior covariance matrix. Defaults to None. Either L or cho_L must be provided.

property solution

The posterior probability distribution for the map.

This is a tuple containing the mean and lower Cholesky factorization of the covariance of the amplitude-weighted spherical harmonic coefficient vector, obtained by solving the regularized least-squares problem via the solve() method.

Note that to obtain the actual covariance matrix from the lower Cholesky factorization \(L\), simply compute \(L L^\top\).

Note also that this is the posterior for the amplitude-weighted map vector. Under this convention, the map amplitude is equal to the first term of the vector and the spherical harmonic coefficients are equal to the vector normalized by the first term.

solve(*, design_matrix=None, **kwargs)

Solve the linear least-squares problem for the posterior over maps.

This method solves the generalized least squares problem given a light curve and its covariance (set via the set_data() method) and a Gaussian prior on the spherical harmonic coefficients (set via the set_prior() method). The map amplitude and coefficients are set to the maximum a posteriori (MAP) solution.

Parameters

design_matrix (matrix, optional) – The flux design matrix, the quantity returned by design_matrix(). Default is None, in which case this is computed based on kwargs.
kwargs (optional) – Keyword arguments to be passed directly to design_matrix(), if a design matrix is not provided.

Returns

A tuple containing the posterior mean for the amplitude-weighted spherical harmonic coefficients (a vector) and the Cholesky factorization of the posterior covariance (a lower triangular matrix).

Note

Users may call draw() to draw from the posterior after calling this method.

property u

The vector of limb darkening coefficients. Read-only

To set this vector, index the map directly using one index: map[n] = ... where n is the degree of the limb darkening coefficient. This may be an integer or an array of integers. Slice notation may also be used.

property udeg: Limb darkening degree. Read-only

property velocity_unit: An astropy.units unit defining the velocity metric for this map.

property veq: The equatorial velocity of the body in units of velocity_unit.

Warning

If this map is associated with a starry.Body instance in a Keplerian system, changing the body’s radius and rotation period does not currently affect this value. The user must explicitly change this value to affect the map’s radial velocity.

property y

The spherical harmonic coefficient vector. Read-only

To set this vector, index the map directly using two indices: map[l, m] = ... where l is the spherical harmonic degree and m is the spherical harmonic order. These may be integers or arrays of integers. Slice notation may also be used.

property ydeg: Spherical harmonic degree of the map. Read-only